PIPELINE PRODUCTS    Tapecoat ® T Tape GPE - Cold Applied Tape Coating TAPECOAT T TAPE GPE - a 65 mil coating with a 3 mil polyethylene backing and 62 mils of adhesive for ambient temperature, below grade application. The 62 mil adhesive provides T Tape with a high degree of conformability. Appropriate for coating tees, bends and other irregular configurations, such as weld beads, wire connections, thermite-welds and all smaller diameter piping.   Tapecoat ® CT - Cold Applied Tape Coating TAPECOAT CT - a 35 mil cold-applied tape coating with a 7 mil polyethylene film backing and 28 mils of adhesive, for ambient temperature below grade application. Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe.     Accessories: Royston SpliceRight Royston SpliceRight - Designed to insulate , waterproof, and protect low-voltage electrical connections. Its tacky elastomeric compound completely seals and waterproofs the connector area. This is then covered with a resin impregnated, moisture cured fabric which when dry provides a mechanical protection for the sealant.       TAPE WRAPPING APPLICATOR TAPECOAT HAND WRAPSTER - a cold tape hand operated application tool, which can assist the operator in wrapping tape with the proper tension and overlap for piping 4” OD and above.